Festool SYMMETRIC SYMC 70 Cordless Mitre Saw
Why this one
01
Bisector cutting
Both mitres cut at one setting, no calculation.
02
0–68° inside
Outside corners to 60°, trims up to 80 mm wide.
03
2 × 18V
Brushless motor on two standard Festool packs.
04
Spotlight
LED shadow line shows exactly where the blade will cut.
The story
Corners without maths
Fitters and joiners installing skirting, crown moulding, glazing beads and end strips spend time measuring and adjusting odd angles. With the SYMC 70 the supplied bevel copies the wall angle, the symmetrical stops set the saw to the bisector, and both mitres are cut at the same setting, left and right. It handles trims up to 80 mm wide and 70 mm high on outside corners.
Portable and even-handed
Rollers let you swing and position the 10.5 kg saw quickly, and the central switch and handle work equally well for left- and right-handers. Power comes from two 18V packs driving a brushless EC-TEC motor; an LED spotlight shows the cut line. A chip bag is available for work without an extractor. Supplied with a fine-cut blade, bevel, workpiece clamp and rollers.
Specifications
Sawing
- Blade diameterEF002855
- 216mm
- ArborEF002856
- 30mm
- Max. mitre angle
- 68°
- Max. cutting widthEF008599
- 80mm
- No-load speedEF008538
- 3,5001/min
- Guide rail compatible
- — No
- Blade brake
