Why this one
01
152 mm core capacity
Wet or dry, handheld or on a stand.
02
AUTOSTOP clutch
Stops the motor if the core bit jams.
03
Level and pressure gauges
On-board aids for straight holes and longer bit life.
The story
Coring without a cable
Plumbers, electricians and HVAC installers who core through walls and slabs for pipes and ducts can work without a generator or trailing leads. The DCD150 cores from 25 to 152 mm, handheld for smaller bores or on a stand for larger holes, wet or dry.
Aids for straight holes
Two speeds cover small bores at 1,600 rpm and large bores at 800 rpm. AUTOSTOP stops the motor if the core jams, an on-board level sensor guides horizontal drilling, and a pressure gauge shows when feed force is right for bit life. An integrated water line connects to Milwaukee water systems.
MX FUEL fit
It shares batteries with the rest of the MX FUEL range. Kits pair it with CP203 or XC406 batteries, and some include the DR255TV drill stand. The 1 1/4″ UNC and 1/2″ G fittings take most common core bits, and ONE-KEY adds tracking.
Specifications
Concrete & demolition
- No-load speedEF008590
- 1,6001/min
- Tool holderEF002843
- 1¼″ UNC core bit thread
- Max. core bit diameterEF002829
- 152mm
- Min. core bit diameter
- 25mm
- Chiselling
- — No
- Rotation stop
- — No
- Active vibration reduction
