Why this one
01
162 mm core capacity
100 mm handheld, 162 mm in a stand.
02
Anti-rotation
Cuts power instantly if the core bit jams.
03
Three-speed gearbox
Matches speed to core bit diameter.
04
Water feed
Connects to the DCE6820N battery water tank.
The story
Service holes without a generator
Plumbers, HVAC and M&E installers core holes through walls and slabs for pipes, ducts and cables. The DCD150 does it on a 54V FLEXVOLT battery: up to 100 mm handheld and up to 162 mm when mounted in a drill stand, so coring can start before mains power is on site.
Control and safety
Three gear ratios match speed to bit size, and a variable-speed trigger with slow start helps position the bit accurately. The anti-rotation system senses loss of control and cuts power immediately if the core bit jams. A side handle with soft grip and an adjustable water hose make wet coring manageable at 5.5 kg.
Water and dust handled
The integrated water feed can connect directly to DeWalt's DCE6820N 18V water tank, and the tool can also be paired with a DeWalt extractor for dry coring. It is supplied in a carrying case with a tool-holder adapter and spanners. As a specialist tool used a few times per project, it is also in our rental fleet.
Specifications
Concrete & demolition
- No-load speedEF008590
- 2,5001/min
- Max. core bit diameterEF002829
- 162mm
- Chiselling
- — No
- Rotation stop
- — No
- Active vibration reduction
- — No
- Active torque control
- ✓ Yes
- Integrated or dockable dust module
- — No
