Milwaukee M18 FMCS FUEL 57 mm Metal Circular Saw
Cold, burr-free metal cutting to 57 mm deep
- 18V
- 150mm
- 57mm
In the box
- 2×Single battery
- 1×Charger
- 1×150 mm metal cutting blade
- 1×Allen key
The M18 FMCS is a 150 mm dry-cut metal circular saw with a 57 mm cut depth. It cuts cold and burr-free, so sheet, strut, tube and angle need little finishing.
Why this one
01
Dry-cut technology
Cold, fast and burr-free cuts in steel.
02
57 mm cut depth
Through strut, tube and angle.
03
Tool-free depth
Adjust from 0 to 57 mm by hand.
04
Dual-action trigger
Prevents accidental starts.
The story
Metal without sparks and grinding
Electricians cutting strut and cable tray, and metalworkers cutting sheet, tube and angle, get clean, cool edges instead of the heat and sparks of a grinder. A carbide-tipped 150 mm blade cuts up to 57 mm deep and leaves edges that need little deburring.
Easy to handle
Depth adjusts from 0 to 57 mm without tools and a plunge lever helps start cuts in the middle of a sheet. A dual-action trigger stops accidental starts, a rafter hook keeps it close, and the Allen key is stored on board so blade changes do not stop the job.
Blades
It comes with a 34-tooth metal blade; replacement blades are 150 × 20 mm, so keep a spare on the van for long runs of strut or cable tray. The kit adds two 5.0 Ah packs and a fast charger in an HD Box, and bare versions are available for M18 users.
Specifications
Sawing
- Blade diameterEF002855
- 150mm
- ArborEF002856
- 20mm
- Cutting depth at 90°EF002849
- 57mm
- No-load speedEF008538
- 3,9001/min
- Guide rail compatible
- — No
- Blade brake
- — No
- Scoring blade
- — No
- Dust extraction port
- — No
Power
- Power sourceEF000145
- Cordless (battery)
- VoltageEF000002
- 18V
- Motor
- Brushless
Physical
- VibrationEF017820
- 2.3m/s²
- Vibration uncertaintyEF017821
- 1.5m/s²
- Sound pressureEF017718
- 98.1dB(A)
- Sound powerEF017719
- 109.1dB(A)
- LED work light
- — No
- Belt hook
- — No
