Why this one
01
127 mm cutting depth
355 mm disc for kerbs, paving, pipe and steel.
02
Kickback control
AFT shuts the motor down if the disc binds.
03
Wet cutting
Water connection and XPT sealing for silica dust control.
04
No exhaust
Battery power allows cutting indoors and in trenches.
The story
A disc cutter without fumes
Groundworkers, landscapers and pipe layers cut kerbs, paving, pipes and rebar with a 14" disc cutter. The CE001G matches that job with a 355 mm disc and 127 mm cut, but runs on batteries. There is no pull-start and no exhaust, which matters in basements, trenches and occupied buildings.
Safety features
AFT senses a sudden stop of the disc and shuts down the motor to reduce kickback. An electric brake stops the disc quickly, and a dead-man switch without lock-on prevents runaway starts. XPT sealing and an IPX4 rating allow wet cutting with the water connection to control silica dust.
Running it
Two XGT batteries in series power the cutter; larger 8.0 Ah packs give the longest cutting time. It takes 20 mm and 25.4 mm bore discs, and a grinding trolley is offered for floor cutting. A common hire machine for groundworks projects.
Specifications
Grinding, cutting & sanding
- Disc diameterEF004983
- 355mm
- Max. cutting depthEF005259
- 127mm
- No-load speedEF008590
- 5,3001/min
- Brake
- ✓ Yes
- Soft start
- — No
- Kickback stop
- ✓ Yes
- Paddle switch
- — No
- Water connection
