Why this one
01
Guide-rail compatible
Magnesium base runs on Milwaukee rails for straight cuts.
02
68 mm cut depth
Cuts three stacked 22 mm OSB boards.
03
FORGE-optimised
Holds 6,000 rpm through the cut on FORGE packs.
04
Dust extractor port
DEK26 adaptor included for Milwaukee extractors.
The story
For framing and sheet goods
Carpenters and builders cutting studs, joists and sheet material need a saw that crosses between rough framing and straighter panel cuts. This 190 mm saw cuts 68 mm deep, enough for a stack of three 22 mm OSB boards, and switches to guide-rail cutting when accuracy matters.
Rail-compatible base
The magnesium shoe fits Milwaukee guide rails and keeps the same cut line at any bevel angle, reducing setup time. The saw holds 6,000 rpm under load, which Milwaukee rates at 700 cuts in 90 x 45 mm pine on one 12.0 Ah FORGE pack. An LED and dust blower keep the cut line visible.
Dust and power
A DEK26 adaptor connects the saw to Milwaukee dust extractors, and a rafter hook helps on roofs and scaffolds. It takes any M18 pack but is tuned for FORGE batteries; the kit includes one FB12 12.0 Ah pack and the M12-18 FC charger.
Specifications
Sawing
- Blade diameterEF002855
- 190mm
- ArborEF002856
- 30mm
- Cutting depth at 90°EF002849
- 68mm
- Cutting depth at 45°EF002850
- 53mm
- Max. bevel angleEF004988
- 50°
- No-load speedEF008538
- 6,0001/min
