Festool TS 75 Plunge-Cut Saw
Big plunge saw: 75 mm depth and 210 mm blade for thick stock
Why this one
01
75 mm depth
55 mm at 45° with a 210 mm blade.
02
Rail stop included
FS-RSP stops the saw running back on the rail.
03
Constant speed
MMC electronics and slip clutch under heavy load.
04
Quick-acting brake
Blade stops shortly after release.
The story
For thick doors and multi-layer boards
When stock is thicker than a TS 55 or TS 60 can handle, the TS 75 takes over: solid entrance doors, multi-layer panels, raised floors, conservatory profiles and cable ducts. Joiners and carpenters use it on the FS guide rail for long, straight rip cuts in heavy material, with the splinter guard giving clean edges on the good face.
Controlled power
MMC electronics keep speed constant from 1,350 to 4,400 rpm, a slip clutch protects the drive, and the quick-acting brake stops the blade after the cut. The spring-loaded riving knife lets it plunge without removing parts, and play on the rail is adjusted without tools. FastFix makes blade changes quick. Supplied with a universal blade, FS-RSP stop and plug it cable in a Systainer³ SYS3 M 437.
Specifications
Sawing
- Blade diameterEF002855
- 210mm
- ArborEF002856
- 30mm
- Cutting depth at 90°EF002849
- 75mm
- Cutting depth at 45°EF002850
- 55mm
- Max. bevel angleEF004988
- 47°
- No-load speedEF008538
- 4,4001/min
