Why this one
01
Three modes
Gear-driven rotary, random orbit and polishing in one tool.
02
720 W geared drive
Fast stock removal without the sander running away.
03
FastFix pad change
Swap pads without tools.
04
Protector edge guard
Sand up to edges without damaging pad or workpiece.
The story
One sander for rough and fine
The RO 150 is for painters, restorers and joiners who strip old paint, flatten glued-up panels and then finish the same surface. In ROTEX mode the pad is geared to turn at 320–660 rpm while oscillating, removing material fast; in eccentric mode it runs up to 6,800 orbits for a scratch-free finish; a third mode polishes.
Handling and control
The 720 W motor and geared drive give strong torque, so the sander tracks straight under pressure. Several grip positions help on large areas, and the Protector edge guard lets you sand up to walls and edges without damaging the pad or the next surface. MMC electronics keep speed constant.
Quick pad changes
The FastFix pad swaps without tools, so a soft pad for contours or a hard pad for flat work goes on in seconds. StickFix abrasives, the MULTI-JETSTREAM 2 hole pattern and a CLEANTEC hose keep dust down. The FEQ version comes with pad and cable; the Plus adds a Systainer³ and abrasives.
Specifications
Grinding, cutting & sanding
- Sanding pad diameterEF003617
- 150mm
- Sanding orbitEF002847
- 5mm
- No-load speedEF008590
- 6,8001/min
- Brake
- — No
- Soft start
- — No
- Kickback stop
- — No
- Paddle switch
- — No
