Festool BS 75 Belt Sander
75 mm belt sander with bench unit for flattening and stock removal
Why this one
01
75 mm belt
533 mm belt with a 135 × 75 mm sanding area.
02
Balanced motor
In-line motor keeps the sander level.
03
Variable belt speed
200–380 m/min for different woods.
04
Bench unit
Stationary use for strips and small parts.
The story
Flat surfaces, fast
Joiners and carpenters use the BS 75 for flattening glued-up panels and tabletops, removing planer marks and taking old finishes off large surfaces. The motor sits along the belt, which puts the centre of gravity low and centred so the sander tracks straight without tilting. Belt speed adjusts from 200 to 380 m/min to suit hardwood, softwood and veneer.
Two tools in one
Clamp it into the supplied bench unit and it becomes a stationary sander for strips and small parts. A dust bag is included, or connect a CLEANTEC extractor through the adapter. Optional sanding frames limit the depth of cut on veneers. Supplied with dust bag, extraction adapter, bench unit and a P100 belt in a Systainer³ SYS3 XXL 237.
Specifications
Grinding, cutting & sanding
- Brake
- — No
- Soft start
- — No
- Kickback stop
- — No
- Paddle switch
- — No
- Water connection
- — No
- Dust extraction port
- ✓ Yes
Power
- Power sourceEF000145
- Corded (mains)
