Festool MFK 700 Modular Edge Router
Edge router with swappable bases for banding, chamfers and grooves
Why this one
01
Modular tables
Horizontal, 1.5° and vertical bases change without tools.
02
Standard cutters
Any 6 or 8 mm shank cutter up to 32 mm.
03
1/10 mm depth
Fine adjustment for flush trimming.
04
Built-in extraction
Chips collected through the router table.
The story
One motor, several bases
The MFK 700 is built for joiners and shopfitters who trim edging on site and in the workshop. The horizontal table with its 130 mm support flushes banding precisely; swap it without tools for the 1.5° table to leave the edge a hair proud, or for the vertical base to rout rebates and grooves. Standard cutters up to 32 mm diameter fit the 8 mm collet.
Clean and accurate
Depth adjusts to a tenth of a millimetre and a spindle lock makes cutter changes quick. The hardboard base runner glides without marking laminates. Extraction is built into the table, so a CLEANTEC extractor collects the chips at the cutter. Speed is variable from 10,000 to 26,000 rpm to avoid burning plastics. Supplied with an 8 mm collet in a Systainer³ SYS3 M 187.
Specifications
Routing, joining & planing
- ColletEF008592
- 8mm
- No-load speedEF008590
- 26,0001/min
- Fine depth adjustment
- ✓ Yes
- Dust extraction port
- ✓ Yes
Power
- Power sourceEF000145
- Corded (mains)
- Rated inputEF001950
- 720W
