Why this one
01
2.6 J impact
Efficient drilling from 8 to 16 mm, up to 26 mm maximum.
02
KickBack Control
Sensor cuts the motor when the bit binds.
03
Clip-on HEPA option
GDE 18V-16 extractor mounts on the hammer, no hose needed.
The story
Who it's for
Electricians, plumbers and HVAC installers drilling anchor and cable holes in concrete and masonry every day. It drills up to 26 mm and is most efficient between 8 and 16 mm, and chisel mode handles light chasing and tile removal.
Control and comfort
KickBack Control shuts the motor down if the bit jams, and Electronic Precision Control gives a gentle start for accurate hole placement. The brushless motor, Vibration Control and an LED light make overhead work less tiring. Vario-Lock sets the chisel angle, and a rotation-control clutch adds protection.
System and dust
The optional GDE 18V-16 dust extractor clips onto the hammer and runs from the same battery, giving a self-contained HEPA solution without a hose. It takes any Bosch 18V or AMPShare pack and comes with an auxiliary handle and 210 mm depth stop.
Specifications
Concrete & demolition
- Impact energyEF002831
- 2.6J
- Impact rateEF004984
- 4,3501/min
- No-load speedEF008590
- 9801/min
- Tool holderEF002843
- SDS-plus
- Optimal drilling range, up to
- 16mm
- Max. drilling diameter, concreteEF004553
- 26mm
