Festool TRION PS 300 Pendulum Jigsaw
Barrel-grip jigsaw with three-way blade guide, 120 mm in wood
Why this one
01
Three-way guide
Blade supported on three sides for square cuts.
02
Barrel grip
Low hand position for precise curves.
03
Rail compatible
Runs on FS guide rails with an adapter.
04
FastFix blades
Tool-free blade change.
The story
Control close to the cut
Holding the TRION by its body puts your hand low and close to the blade, which suits curved work, sink and hob cut-outs, scribing end strips and cutting from below. The three-way guide supports the blade on both sides and behind, so it stays upright in thick hardwood and angled cuts stay true. The splinter guard gives clean edges on laminated board.
Straight when you need it
With the FS-PS/PSB 300 adapter the saw runs on a Festool guide rail for straight cuts in worktops and panels. FastFix lets you change blades without tools, and MMC electronics hold the stroke rate under load. It connects to a CLEANTEC extractor, and the plug it cable detaches for storage. Supplied with two blades and splinter guard in a Systainer³ SYS3 M 137.
Specifications
Sawing
- Max. cutting depth, woodEF002882
- 120mm
- Max. cutting depth, steelEF004976
- 10mm
- Max. bevel angleEF004988
- 45°
- Stroke lengthEF000174
- 26mm
- Stroke rateEF004890
- 2,9001/min
- Pendulum settings
- 4
- Guide rail compatible
