Festool EHL 65 One-Handed Planer
2.7 kg one-handed planer with spiral cutter and 4 mm cut depth
Why this one
01
65 mm width
Up to 4 mm per pass, 23 mm rebates.
02
Spiral cutter
Quieter cut and smoother finish.
03
One-handed
2.7 kg with soft grip and extra hand positions.
04
Two-way extraction
Chips out left or right, bag or extractor.
The story
For trimming and fitting
Joiners and fitters use the EHL 65 to trim doors, infill panels, carcasses, skirting and trim during installation. At 2.7 kg with a soft-grip handle and extra grip points it can be guided with one hand while the other holds the workpiece. The chip depth is set on the front knob, from a fine skim to 4 mm, and rebates up to 23 mm are possible with the side fence.
Quieter spiral cutter
Instead of straight knives, the Spir-O-Cut spiral blade cuts progressively, which reduces noise and gives a cleaner surface on difficult grain. Blades change quickly and set themselves without adjustment. Chips can be ejected left or right, into a bag or a CLEANTEC extractor. Supplied with parallel side fence and plug it cable in a Systainer³.
Specifications
Routing, joining & planing
- Planing widthEF002866
- 65mm
- Max. planing depthEF002865
- 4mm
- No-load speedEF008590
- 15,6001/min
- Fine depth adjustment
- — No
- Dust extraction port
- ✓ Yes
Power
- Power sourceEF000145
- Corded (mains)
