Why this one
01
Large DOMINO tenons
Tenons up to 14 × 140 mm, mortises 15–70 mm deep.
02
720 W drive
21,000 rpm, height 10–50 mm, mitre 0–90°.
03
KV connectors
Works with DOMINO knock-down fittings for demountable frames.
The story
For heavy joinery
The DF 700 is for joiners and carpenters making doors, gates, stairs, beds, tables and timber frames where joints must carry real load. It routes slots for DOMINO tenons up to 14 × 140 mm, with mortise depths from 15 to 70 mm, and saves a lot of time compared with setting up a stationary mortiser.
Same principle, more reach
Like the smaller DOMINO, the cutter rotates and oscillates, giving a precise slot with little effort. The 720 W motor runs at 21,000 rpm; height adjusts from 10 to 50 mm and the fence tilts from 0 to 90° for mitres. Quick stops and indexing pins make repeat spacing fast.
System and hire
It works with DOMINO KV knock-down connectors and all DOMINO system accessories. The port connects to CLEANTEC extractors, and the plug it cable detaches. The Plus version comes with a 12 mm cutter, an empty tenon box and a Systainer³ SYS3 M 437. Also offered for hire for occasional heavy jobs.
Specifications
Routing, joining & planing
- Max. tenon thickness
- 14mm
- Max. mortise depthEF011163
- 70mm
- No-load speedEF008590
- 21,0001/min
- Fine depth adjustment
- — No
- Dust extraction port
- ✓ Yes
Power
- Power sourceEF000145
- Corded (mains)
