Why this one
01
Dust class M
For mineral and hardwood dust with limits above 0.1 mg/m³.
02
FlowDetect
Warns when hose air speed falls below 20 m/s.
03
36 l container
3,900 l/min and 24,000 Pa for long sanding runs.
04
Automatic start
Tool socket and Bluetooth start with corded or battery tools.
The story
For regulated dust
The CTM 36 E is for renovation crews, drywall finishers and painters who produce mineral dust from filler, plaster and concrete, or hardwood dust with tighter limits. It is approved for dust class M, limit values above 0.1 mg/m³, and pairs with the PLANEX drywall sander, SDS drilling and chasing work.
Monitored airflow
FlowDetect checks that air in the hose moves at least 20 m/s and warns if it drops, so a blocked hose or full bag does not go unnoticed. Five suction levels, touch control, auto-start from the 2,400 W socket and Bluetooth start with battery tools are standard. It picks up water as well as dust.
Large but mobile
The 36 l container suits long sanding sessions. Large swivel castors with a brake, a hose holder and cable winder make it manageable on site, and Systainers lock onto the top via T-LOC. It ships with main filter, SELFCLEAN bag and 3.5 m antistatic hose. Also offered for hire.
Specifications
Dust extraction
- Dust classEF012148
- M class
- Container volumeEF000176
- 36l
- Max. airflow
- 234m³/h
- Max. vacuumEF002870
- 24kPa
- Hose diameterEF002872
- 27mm
- Hose lengthEF007907
- 3.5m
- Power tool socket
