Why this one
01
86 mm depth
62 mm at 45° and 47 mm at 60°.
02
Bevel to 60°
Central clamp for quick, secure angle setting.
03
FSK and FS rails
Cross-cut and rip on Festool rail systems.
04
Groove cutter option
VN-HK85 unit converts it for grooving.
The story
For beams, tenons and sheet material
Carpenters and timber-frame builders use the HK 85 to cut square timber, tenons, boards and thick sheet material, as well as wood-fibre insulation and sandwich panels. The plunge-style depth adjustment, remote lever for the pendulum guard and riving knife make heavy cuts safer, and the central clamp sets bevels from 0 to 60° in one move.
A system saw
On an FSK cross-cutting rail it gives fast, repeatable cross and mitre cuts on site; on an FS guide rail it rips long, straight edges. The VN-HK85 grooving unit turns it into a groove cutter for notches and housings. MMC electronics keep the 1,900 W motor at constant speed under load, and the quick-acting brake stops the blade. Supplied with a blade and parallel side fence in a Systainer³ SYS3 M 437.
Specifications
Sawing
- Blade diameterEF002855
- 230mm
- ArborEF002856
- 30mm
- Cutting depth at 90°EF002849
- 86mm
- Cutting depth at 45°EF002850
- 62mm
- Max. bevel angleEF004988
- 60°
- No-load speedEF008538
- 3,5001/min
