# DeWalt DCS7485 54V XR FLEXVOLT 210 mm Table Saw

> Cordless 210 mm site table saw with 610 mm rip capacity

- **Brand:** [DeWalt](https://tools-universe.superfast.shop/en/brands/dewalt.md)
- **Battery platform:** [DeWalt XR FLEXVOLT 54V](https://tools-universe.superfast.shop/en/battery-platforms/dewalt-xr-flexvolt-54v.md)
- **Category:** [Sawing](https://tools-universe.superfast.shop/en/sawing.md) › Table saw
- **Item no.:** DCS7485N-XJ
- **Price from:** €751.24 excl. VAT (€909.00 incl. VAT)
- **Also for rent:** [DeWalt DCS7485 54V XR FLEXVOLT 210 mm Table Saw — rental](https://tools-universe.superfast.shop/en/rental/dewalt-dcs7485-54v-xr-flexvolt-210-mm-table-saw-rental.md)

## Summary

A FLEXVOLT-powered 210 mm table saw with 65 mm cutting depth, 610 mm rip capacity to the right and a rack-and-pinion fence. A steel roll cage protects it on site, and it weighs 21.5 kg without battery.

## Why this one

- **610 mm rip capacity**: Rack-and-pinion fence, 318 mm to the left.
- **Runs on FLEXVOLT**: About 92 m of 19 mm OSB per 6 Ah battery.
- **65 mm cutting depth**: 45 mm at 45° bevel.
- **Steel roll cage**: Protects the saw in transport and on site.

## The story

### Ripping where there is no power

Carpenters working on roofs, lofts and early-stage new builds often need to rip battens, fillets and sheet strips before temporary power is installed. The DCS7485 brings a real table saw to those places: a 210 mm blade cutting 65 mm deep, with DeWalt quoting 92 m of 19 mm OSB per 6 Ah FLEXVOLT pack.

### Proper table-saw features

The rack-and-pinion fence moves parallel for accurate rips up to 610 mm right and 318 mm left, and the blade bevels to 45°. A cast table top stays flat, and the steel roll cage protects the saw when it is thrown in a van or dropped onto a scaffold deck. A push stick, mitre gauge and dust adaptor are included.

### Shares batteries with the site

It runs on the same FLEXVOLT packs as the mitre saw, SDS hammers and extractor, so a crew can go fully cordless. Since a table saw is usually needed for short phases, it is also available from our rental fleet.

## Specifications

### Sawing

| Specification | Value | ETIM |
|---|---|---|
| Blade diameter | 210 mm | EF002855 |
| Arbor | 30 mm | EF002856 |
| Cutting depth at 90° | 65 mm | EF002849 |
| Cutting depth at 45° | 45 mm | EF002850 |
| Max. bevel angle | 45 ° | EF004988 |
| Rip capacity | 610 mm |  |
| No-load speed | 5,800 1/min | EF008538 |
| Guide rail compatible | No |  |
| Blade brake | No |  |
| Scoring blade | No |  |
| Dust extraction port | Yes |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Cordless (battery) | EF000145 |
| Voltage | 54 V | EF000002 |
| Motor | Brushless |  |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 21.5 kg | EF011121 |
| Weight with battery | 23 kg | EF002826 |
| Length | 605 mm | EF001438 |
| Width | 605 mm | EF000008 |
| Height | 330 mm | EF000040 |
| LED work light | No |  |
| Belt hook | No |  |

**Technology:** [XR brushless motors](https://tools-universe.superfast.shop/en/technology/xr-brushless-motors.md), [FLEXVOLT](https://tools-universe.superfast.shop/en/technology/flexvolt.md)

## Choose a version

### Bare tool

- **Item no.:** DCS7485N-XJ
- **Stock:** In stock
- **Price:** €751.24 excl. VAT (€909.00 incl. VAT)
- **In the box:**
  - 1 × 24-tooth saw blade
  - 1 × Mitre gauge
  - 2 × Blade wrench
  - 1 × Rip fence
  - 1 × Dust extraction adaptor
  - 1 × Push stick

### 2 × 6.0 Ah FLEXVOLT, charger

- **Item no.:** DCS7485T2-QW
- **Stock:** In stock
- **Price:** €1,156.20 excl. VAT (€1,399.00 incl. VAT)
- **In the box:**
  - 2 × 6.0 Ah XR FLEXVOLT battery
  - 1 × DCB118 charger
  - 1 × Soft bag for batteries and charger
  - 1 × 24-tooth saw blade
  - 1 × Mitre gauge
  - 1 × Rip fence
  - 1 × Dust extraction adaptor
  - 1 × Push stick

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| Bare tool | DCS7485N-XJ | €751.24 | €909.00 | NOK 8,792.00 | NOK 10,990.00 | SEK 7,992.00 | SEK 9,990.00 |
| 2 × 6.0 Ah FLEXVOLT, charger | DCS7485T2-QW | €1,156.20 | €1,399.00 | NOK 13,592.00 | NOK 16,990.00 | SEK 13,592.00 | SEK 16,990.00 |

---

Web page: https://tools-universe.superfast.shop/en/sawing/dewalt-dcs7485-54v-xr-flexvolt-210-mm-table-saw
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.