# Makita DTW700 18V LXT Brushless 1/2" Impact Wrench

> 700 Nm 1/2" impact wrench with 1,000 Nm nut-busting torque

- **Brand:** [Makita](https://tools-universe.superfast.shop/en/brands/makita.md)
- **Battery platform:** [Makita LXT 18V](https://tools-universe.superfast.shop/en/battery-platforms/makita-lxt-18v.md)
- **Category:** [Drilling & driving](https://tools-universe.superfast.shop/en/drilling-and-driving.md) › Impact wrench
- **Item no.:** DTW700Z
- **ETIM class:** Impact screwdriver (battery)
- **Price from:** €280.17 excl. VAT (€339.00 incl. VAT)

## Summary

The DTW700 is a mid-to-high torque 1/2" square drive impact wrench on 18V LXT. It delivers 700 Nm fastening torque, 1,000 Nm to break seized nuts and handles M10 to M24 bolts.

## Why this one

- **1,000 Nm nut-busting**: Breaks seized nuts; 700 Nm maximum fastening torque.
- **Auto-stop modes**: Three reaction-time settings stop the wrench when the nut seats.
- **XPT protection**: Seals against dust and water for outdoor steelwork.
- **M10–M24 capacity**: Standard bolts on a 1/2" square drive.

## The story

### Built for bolted work

Steel erectors, scaffold and plant crews and groundworkers need to run bolts up and break them loose without a compressor. The DTW700 covers M10 to M24 standard bolts on a 1/2" square drive, enough for steel connections, formwork, anchor bolts and vehicle wheel nuts.

### Four modes and auto-stop

Four power settings run from 150 Nm to 700 Nm, and three reaction-time settings stop the tool automatically once the nut seats, in forward or reverse. That limits over-tightening and stops loosened nuts spinning off the thread. XPT sealing, a job light and an ergonomic chassis make it suitable for outdoor work.

### In the LXT range

At 2.0 kg bare it is compact for its output and runs on the same LXT packs as your drills and drivers, so there is no extra platform to carry. An extension handle and a Type 3 MAKPAC with inlay are listed as options.

## Specifications

### Drilling & driving

| Specification | Value | ETIM |
|---|---|---|
| Torque, hard joint | 700 Nm | EF002842 |
| Breakaway torque | 1,000 Nm |  |
| No-load speed, gear 1 | 2,200 1/min | EF011125 |
| Impact rate | 2,700 1/min | EF004984 |
| Tool holder | ½″ square drive | EF002843 |
| Max. screw diameter | 24 mm | EF005261 |
| Hammer mode | No |  |
| Kickback control | No |  |
| Interchangeable heads | No |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Cordless (battery) | EF000145 |
| Voltage | 18 V | EF000002 |
| Motor | Brushless |  |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 2 kg | EF011121 |
| Weight with battery | 2.3 kg | EF002826 |
| Length | 170 mm | EF001438 |
| Width | 81 mm | EF000008 |
| Height | 276 mm | EF000040 |
| Vibration | 19 m/s² | EF017820 |
| Vibration uncertainty | 2 m/s² | EF017821 |
| Sound pressure | 97 dB(A) | EF017718 |
| Sound power | 105 dB(A) | EF017719 |
| LED work light | Yes |  |
| Belt hook | Yes |  |

**Technology:** [BL Brushless Motor](https://tools-universe.superfast.shop/en/technology/bl-brushless-motor.md), [XPT (eXtreme Protection Technology)](https://tools-universe.superfast.shop/en/technology/xpt-extreme-protection-technology.md)

## Choose a version

### Bare tool

- **Item no.:** DTW700Z
- **Stock:** 6 in stock
- **Price:** €280.17 excl. VAT (€339.00 incl. VAT)
- **In the box:**
  - 1 × Hook

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| Bare tool | DTW700Z | €280.17 | €339.00 | NOK 3,279.20 | NOK 4,099.00 | SEK 3,199.20 | SEK 3,999.00 |

---

Web page: https://tools-universe.superfast.shop/en/drilling-and-driving/makita-dtw700-18v-lxt-brushless-12-impact-wrench
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.