# Festool TID 18 Cordless Impact Driver

> Compact 18V impact driver with 180 Nm and a self-tapping screw mode

- **Brand:** [Festool](https://tools-universe.superfast.shop/en/brands/festool.md)
- **Battery platform:** [Festool 18V](https://tools-universe.superfast.shop/en/battery-platforms/festool-18v.md)
- **Category:** [Drilling & driving](https://tools-universe.superfast.shop/en/drilling-and-driving.md) › Impact driver
- **Item no.:** 576481
- **ETIM class:** Impact screwdriver (battery)
- **Price from:** €271.90 excl. VAT (€329.00 incl. VAT)

## Summary

A 0.9 kg impact driver with a brushless EC-TEC II motor, 180 Nm, three speed settings and a T-mode that slows down for self-drilling screws in sheet metal. Sold bare in a Systainer³ for use with any Festool 18V pack.

## Why this one

- **180 Nm torque**: Up to 8 × 220 mm screws in softwood.
- **T-mode**: Controlled speed for self-drilling screws in sheet metal.
- **Brushless EC-TEC II**: Three speed levels up to 3,200 rpm, 4,500 impacts per minute.
- **0.9 kg bare**: Compact body for overhead and confined work.

## The story

### For long screws and structural fixings

The TID 18 is for carpenters, roofers and installers who drive long wood screws, lag bolts and self-tapping screws all day. The tangential impact mechanism puts 180 Nm into the fastener without twisting back on the wrist, and it handles screws up to 8 × 220 mm in softwood. Three speeds run to 3,200 rpm.

### T-mode and compact build

The dedicated T-mode starts slowly and backs off when the screw breaks through, which stops self-drilling screws stripping in thin steel. The body is short and light at 0.9 kg bare, so it works well overhead and between joists. A tool-free 1/4" hex holder, LED light, bit storage and a belt clip for either side are built in.

### Fits the 18V platform

It takes every Festool 18V pack, from the light Compact batteries to the Li-HighPower packs, and the Basic version comes without battery in a Systainer³ SYS3 M 187 that stacks with the rest of the kit or fits bott van racking.

## Specifications

### Drilling & driving

| Specification | Value | ETIM |
|---|---|---|
| Torque, hard joint | 180 Nm | EF002842 |
| No-load speed, gear 1 | 1,200 1/min | EF011125 |
| No-load speed, top gear | 2,000 1/min |  |
| Impact rate | 4,500 1/min | EF004984 |
| Gears | 3 |  |
| Tool holder | ¼″ hex | EF002843 |
| Max. screw diameter | 8 mm | EF005261 |
| Hammer mode | No |  |
| Kickback control | No |  |
| Interchangeable heads | No |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Cordless (battery) | EF000145 |
| Voltage | 18 V | EF000002 |
| Batteries required | 1 |  |
| Motor | Brushless |  |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 0.9 kg | EF011121 |
| Vibration | 24 m/s² | EF017820 |
| Vibration uncertainty | 4 m/s² | EF017821 |
| Sound pressure | 100 dB(A) | EF017718 |
| Sound power | 108 dB(A) | EF017719 |
| LED work light | Yes |  |
| Belt hook | Yes |  |

**Technology:** [EC-TEC brushless motor](https://tools-universe.superfast.shop/en/technology/ec-tec-brushless-motor.md), [Systainer³](https://tools-universe.superfast.shop/en/technology/systainer.md)

## Choose a version

### Basic: bare tool, Systainer³

- **Item no.:** 576481
- **Stock:** In stock
- **Price:** €271.90 excl. VAT (€329.00 incl. VAT)
- **In the box:**
  - 1 × Belt clip
  - 1 × Empty Systainer³

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| Basic: bare tool, Systainer³ | 576481 | €271.90 | €329.00 | NOK 3,199.20 | NOK 3,999.00 | SEK 3,039.20 | SEK 3,799.00 |

---

Web page: https://tools-universe.superfast.shop/en/drilling-and-driving/festool-tid-18-cordless-impact-driver
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.