# Festool TDC 18/4 QUADRIVE Cordless Drill Driver

> Four-speed 18V drill driver: 75 Nm for big screws, 3,600 rpm for holes

- **Brand:** [Festool](https://tools-universe.superfast.shop/en/brands/festool.md)
- **Battery platform:** [Festool 18V](https://tools-universe.superfast.shop/en/battery-platforms/festool-18v.md)
- **Category:** [Drilling & driving](https://tools-universe.superfast.shop/en/drilling-and-driving.md) › Drill driver
- **Item no.:** 575601
- **ETIM class:** Drilling machine/screwdriver (battery)
- **Price from:** €354.55 excl. VAT (€429.00 incl. VAT)

## Summary

The non-percussion QUADRIVE: four mechanical gears, 75 Nm hard-joint torque and up to 3,600 rpm, with KickbackStop. It drives 10 × 300 mm screws into timber and bores up to 70 mm with Forstner bits.

## Why this one

- **Four gears**: From 500 rpm with 50 Nm up to 3,600 rpm for drilling.
- **KickbackStop**: Cuts the drive if the bit jams and the body starts to rotate.
- **70 mm in wood**: Forstner bits up to 70 mm; 13 mm in steel.
- **FastFix chucks**: CENTROTEC and 13 mm keyless chucks included.

## The story

### Two drills in one

Most drivers are a compromise between low-speed torque and high-speed drilling. The TDC 18/4 splits the job over four gears in a metal gearbox: the first gives 50 Nm for long structural screws, the fourth spins at 3,600 rpm for clean small holes in metal and hardwood. It suits carpenters building substructures and frames, and fitters setting doors and windows who need both in the same hour.

### Safer with big bits

When a large bit jams, KickbackStop senses the sudden rotation and cuts the drive before the handle twists out of your hand. The FastFix interface takes the supplied CENTROTEC and 13 mm keyless chucks, and the angle and eccentric heads from the other 18V drivers. An auxiliary handle, bit holder and belt clip are in the Systainer³; batteries are bought separately, with the 4.0 Ah or 5.0 Ah packs recommended for heavy work.

## Specifications

### Drilling & driving

| Specification | Value | ETIM |
|---|---|---|
| Torque, hard joint | 75 Nm | EF002842 |
| Torque, soft joint | 50 Nm |  |
| No-load speed, gear 1 | 500 1/min | EF011125 |
| No-load speed, top gear | 800 1/min |  |
| Gears | 4 |  |
| Tool holder | Interchangeable chuck system | EF002843 |
| Chuck capacity | 13 mm | EF002832 |
| Max. drilling diameter, wood | 70 mm | EF002838 |
| Max. drilling diameter, steel | 13 mm | EF002836 |
| Hammer mode | No |  |
| Kickback control | Yes |  |
| Interchangeable heads | Yes |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Cordless (battery) | EF000145 |
| Voltage | 18 V | EF000002 |
| Batteries required | 1 |  |
| Motor | Brushless |  |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 1.2 kg | EF011121 |
| Vibration | 3 m/s² | EF017820 |
| Vibration uncertainty | 1.5 m/s² | EF017821 |
| Sound pressure | 76 dB(A) | EF017718 |
| Sound power | 84 dB(A) | EF017719 |
| LED work light | No |  |
| Belt hook | Yes |  |

**Technology:** [EC-TEC brushless motor](https://tools-universe.superfast.shop/en/technology/ec-tec-brushless-motor.md), [FastFix / CENTROTEC](https://tools-universe.superfast.shop/en/technology/fastfix-centrotec.md), [KickbackStop](https://tools-universe.superfast.shop/en/technology/kickbackstop.md), [Systainer³](https://tools-universe.superfast.shop/en/technology/systainer.md), [Bluetooth / ASI auto-start](https://tools-universe.superfast.shop/en/technology/bluetooth-asi-auto-start.md)

## Choose a version

### Basic: bare tool, Systainer³

- **Item no.:** 575601
- **Stock:** In stock
- **Price:** €354.55 excl. VAT (€429.00 incl. VAT)
- **In the box:**
  - 1 × Tool chuck WH-CE CENTROTEC
  - 1 × Bit holder BH 60 CE-Imp
  - 1 × Keyless chuck KC 13-1/2-MMFP
  - 1 × Auxiliary handle AHS-43/230
  - 1 × Bit PZ 2
  - 1 × Belt clip
  - 1 × Empty Systainer³

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| Basic: bare tool, Systainer³ | 575601 | €354.55 | €429.00 | NOK 4,079.20 | NOK 5,099.00 | SEK 3,919.20 | SEK 4,899.00 |

---

Web page: https://tools-universe.superfast.shop/en/drilling-and-driving/festool-tdc-184-quadrive-cordless-drill-driver
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.