# DeWalt DCD800 18V XR Brushless Compact Drill Driver

> 90 Nm two-speed drill driver in a 161 mm long body

- **Brand:** [DeWalt](https://tools-universe.superfast.shop/en/brands/dewalt.md)
- **Battery platform:** [DeWalt XR 18V](https://tools-universe.superfast.shop/en/battery-platforms/dewalt-xr-18v.md)
- **Category:** [Drilling & driving](https://tools-universe.superfast.shop/en/drilling-and-driving.md) › Drill driver
- **Item no.:** DCD800H2T-QW
- **ETIM class:** Drilling machine/screwdriver (battery)
- **Price from:** €329.75 excl. VAT (€399.00 incl. VAT)

## Summary

A compact brushless drill driver that fits inside cabinets and between joists yet delivers up to 90 Nm. This kit pairs it with two 5.0 Ah POWERSTACK batteries, a charger and a TSTAK box.

## Why this one

- **Compact 161 mm body**: Short head length reaches inside cabinets, between studs and into service voids.
- **90 Nm maximum torque**: Two-speed metal gearbox handles holes up to 55 mm in wood.
- **POWERSTACK kit**: Two 5.0 Ah pouch-cell batteries keep the tool light and compact.
- **Pivoting foot LED**: Three light modes aimed at the work, not the chuck.

## The story

### The everyday driver for fitters

Kitchen fitters, electricians and interior installers spend most of the day drilling pilot holes and driving screws in tight spots. The DCD800 is built for that: at 161 mm long and 1.28 kg it slips into carcasses and ceiling voids, yet 90 Nm of torque covers most drilling and fastening without reaching for a heavier combi drill.

### Simple, precise control

A two-speed all-metal gearbox and 15 clutch positions give repeatable results from small hinge screws to 55 mm holes in timber. The trigger is tuned for fine starts, and a three-mode LED in the foot pivots to light the work instead of the chuck, which helps in shadowy cupboards and under sinks.

### Lighter with POWERSTACK

The kit comes with two 5.0 Ah POWERSTACK packs, whose stacked pouch cells are more compact than a standard 5 Ah battery and give the drill a shorter, better-balanced feel. Everything packs into a TSTAK box, and the batteries run every other tool on the 18V XR platform.

## Specifications

### Drilling & driving

| Specification | Value | ETIM |
|---|---|---|
| Torque, hard joint | 90 Nm | EF002842 |
| No-load speed, gear 1 | 650 1/min | EF011125 |
| No-load speed, top gear | 2,000 1/min |  |
| Gears | 2 |  |
| Torque settings | 15 |  |
| Tool holder | Keyless chuck 13 mm | EF002843 |
| Chuck capacity | 13 mm | EF002832 |
| Max. drilling diameter, wood | 55 mm | EF002838 |
| Max. drilling diameter, steel | 13 mm | EF002836 |
| Hammer mode | No |  |
| Kickback control | No |  |
| Interchangeable heads | No |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Cordless (battery) | EF000145 |
| Voltage | 18 V | EF000002 |
| Motor | Brushless |  |
| Output power | 500 W | EF003034 |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 1.28 kg | EF011121 |
| Length | 161 mm | EF001438 |
| LED work light | Yes |  |
| Belt hook | Yes |  |

**Technology:** [XR brushless motors](https://tools-universe.superfast.shop/en/technology/xr-brushless-motors.md), [POWERSTACK](https://tools-universe.superfast.shop/en/technology/powerstack.md)

## Choose a version

### 2 × 5.0 Ah POWERSTACK, charger, TSTAK

- **Item no.:** DCD800H2T-QW
- **Stock:** 9 in stock
- **Price:** €329.75 excl. VAT (€399.00 incl. VAT)
- **In the box:**
  - 2 × Single battery
  - 1 × Multi-voltage XR charger
  - 1 × Magnetic bit holder
  - 1 × Belt hook
  - 1 × TSTAK kit box

### Bare tool, TSTAK

- **Item no.:** DCD800NT-XJ
- **Stock:** In stock
- **Price:** €65.29 excl. VAT (€79.00 incl. VAT)
- **In the box:**
  - 1 × Magnetic bit holder
  - 1 × Belt hook
  - 1 × TSTAK kit box

### 2 × 1.7 Ah POWERSTACK, charger, TSTAK

- **Item no.:** DCD800E2T-QW
- **Stock:** In stock
- **Price:** €106.61 excl. VAT (€129.00 incl. VAT)
- **In the box:**
  - 2 × 1.7 Ah POWERSTACK battery
  - 1 × XR charger
  - 1 × TSTAK kit box

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| 2 × 5.0 Ah POWERSTACK, charger, TSTAK | DCD800H2T-QW | €329.75 | €399.00 | NOK 3,919.20 | NOK 4,899.00 | SEK 3,759.20 | SEK 4,699.00 |
| Bare tool, TSTAK | DCD800NT-XJ | €65.29 | €79.00 | NOK 759.20 | NOK 949.00 | SEK 727.20 | SEK 909.00 |
| 2 × 1.7 Ah POWERSTACK, charger, TSTAK | DCD800E2T-QW | €106.61 | €129.00 | NOK 1,199.20 | NOK 1,499.00 | SEK 1,119.20 | SEK 1,399.00 |

---

Web page: https://tools-universe.superfast.shop/en/drilling-and-driving/dewalt-dcd800-18v-xr-brushless-compact-drill-driver
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.