# Hilti DCH 300-X Electric Diamond Cutter

> 305 mm electric diamond cutter for indoor openings

- **Brand:** [Hilti](https://tools-universe.superfast.shop/en/brands/hilti.md)
- **Category:** [Cutting & grinding](https://tools-universe.superfast.shop/en/cutting-and-grinding.md) › Cut-off saw
- **Item no.:** 2149599
- **ETIM class:** Diamond saw (electric)
- **Price from:** €2,478.51 excl. VAT (€2,999.00 incl. VAT)
- **Also for rent:** [Hilti DCH 300-X Electric Diamond Cutter — rental](https://tools-universe.superfast.shop/en/rental/hilti-dch-300-x-electric-diamond-cutter-rental.md)

## Summary

A hand-held 305 mm electric diamond cutter that cuts up to 120 mm deep, wet or dry. It makes openings, chases and slab cuts indoors where a petrol saw cannot be used.

## Why this one

- **120 mm cut depth**: 305 mm blade, depth set in 10 mm steps.
- **Wet or dry**: Wet cutting is about 30% faster and nearly dust-free.
- **Reversed rotation**: Blade direction pulls the saw away from the body.
- **Built-in protection**: Guards against overload, overheating and water.

## The story

### Cutting indoors

Builders, plumbers and electricians need to cut openings, chases and slab joints inside buildings where exhaust fumes rule out a petrol saw. The DCH 300-X runs 305 mm diamond blades at 4900 rpm on a 2300 W motor and cuts 120 mm deep.

### Wet or dry

With the water kit, wet cutting is about 30% faster than dry and almost dust-free; dry cutting works with a compatible Hilti vacuum. The depth gauge sets 40 to 120 mm in 10 mm steps, and the blade turns in reverse, pulling the saw away from the operator's body.

### Protection

Overload, overheat and water protection help it last in wet, dirty work. It is the corded partner to the cordless DSH 700-22 ATC, and the version sold here runs on 110 V site supply. It is expensive and used occasionally, so we also offer it for hire.

## Specifications

### Grinding, cutting & sanding

| Specification | Value | ETIM |
|---|---|---|
| Disc diameter | 305 mm | EF004983 |
| Max. cutting depth | 120 mm | EF005259 |
| No-load speed | 4,900 1/min | EF008590 |
| Brake | No |  |
| Soft start | No |  |
| Kickback stop | No |  |
| Paddle switch | No |  |
| Water connection | Yes |  |
| Dust extraction port | Yes |  |

### Power

| Specification | Value | ETIM |
|---|---|---|
| Power source | Corded (mains) | EF000145 |
| Voltage | 110 V | EF000002 |
| Rated input | 2,300 W | EF001950 |

### Physical

| Specification | Value | ETIM |
|---|---|---|
| Weight | 9.4 kg | EF011121 |
| Length | 677 mm | EF001438 |
| Width | 239 mm | EF000008 |
| Height | 270 mm | EF000040 |
| Vibration | 5.1 m/s² | EF017820 |
| Sound pressure | 106 dB(A) | EF017718 |
| LED work light | No |  |
| Belt hook | No |  |

## Choose a version

### 110 V tool

- **Item no.:** 2149599
- **Stock:** In stock
- **Price:** €2,478.51 excl. VAT (€2,999.00 incl. VAT)
- **In the box:**
  - 1 × Depth gauge 300 DLX
  - 1 × Screwdriver SW 6
  - 1 × Installation wrench SW 24/10

## Prices

Net prices exclude VAT; incl. VAT uses the market rate.

| Version | Item no. | EUR Net (excl. VAT) | EUR Incl. VAT 21 % | NOK Net (excl. VAT) | NOK Incl. VAT 25 % | SEK Net (excl. VAT) | SEK Incl. VAT 25 % |
|---|---|---|---|---|---|---|---|
| 110 V tool | 2149599 | €2,478.51 | €2,999.00 | NOK 29,592.00 | NOK 36,990.00 | SEK 27,992.00 | SEK 34,990.00 |

---

Web page: https://tools-universe.superfast.shop/en/cutting-and-grinding/hilti-dch-300-x-electric-diamond-cutter
Markdown version of this page, for language models. Prices are net (excl. VAT) unless marked incl. VAT.